Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

EDIT TO COME??

 

 Edge Length

Measures an existing straight line on the model. The edge is highlighted when the pointer is properly positioned.

 

 Arc Diameter

The Arc Diameter command measures the diameter of an existing arc on the drawing and draws the circle. SpinFire™ draws a circle and its diameter. The label indicates the length of the diameter and the coordinates of the circle's center point. You can take this measurement only for an arc that already exists in the model itself.

 Arc Radius

The Arc Radius command measures the radius of an existing arc in the drawing and draws the circle. SpinFire™ draws a circle and its diameter. The label indicates the length of the radius and the coordinates of the circle's center point. You can take this measurement only for an arc that already exists in the model itself.

 Circle by Three Points

The Circle by Three Points command draws a circle that passes through three selected points in the drawing and measures the circle's diameter. This command draws a visible diameter that passes through the first point you select. The label also lists the X, Y, and Z coordinates of the circle's center point.

  • No labels