Versions Compared

Old Version 64

changes.mady.by.user Lauralee Reinke (Unlicensed)

Saved on

compared with

New Version Current

changes.mady.by.user Jim Vassello

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Added Change properties panel and contents. Removed the "trailing" change properties text


Panel
borderColor#23bfde
titleLinear Measurements


Expand
titleThe Linear Menu

Image Added


Expand
titleLocate point coordinates
  1. Open the Linear menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.) 
  2. Select Point Coordinates.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on the point whose coordinates you want to see and click. (Crosshairs appear when you mouse over a selectable point.)
  5. Drag and click to position the markup in the drawing.
  6. Optional: Click Copy to copy the markup content to the Windows clipboard.
  7. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.


Expand
titleLocate coordinates of an arc center
  1. Open the Linear menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Arc Center Coordinates.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your pointer over the arc whose center coordinates you want to see and click. (Selectable arcs appear highlighted when you mouse over them.)
  5. Drag and click to position the markup in the drawing.
  6. Optional: Click Copy to copy the markup content to the Windows clipboard.
  7. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.


Expand
titleMeasure an edge length
  1. Open the Linear menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Edge Length.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your pointer over the edge whose length you want to measure and click. (Selectable edges are highlighted when you mouse over them.)
  5. Drag and click to position the markup in the drawing.
  6. Optional: Click Copy to copy the markup content to the Windows clipboard.
  7. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.


Expand
titleMeasure a distance from point to point
  1. Open the Linear menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Point to Point.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Click a radio button to select a measurement axis (the default is Normal).
    3. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on the first point and click. (Crosshairs appear when you mouse over a selectable point.) The selected point is yellow.
  5. Select the end point.
  6. Drag and click to position the markup in the drawing.
  7. Optional: Click Copy to copy the markup content to the Windows clipboard.
  8. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.


Expand
titleMeasure a distance from point to edge
  1. Open the Linear menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Point to Edge.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Click a radio button to select a measurement axis (the default is Normal).
    3. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on the first point and click. (Crosshairs appear when you mouse over a selectable point.) The selected point is yellow.
  5. Select the edge. (Selectable edges are highlighted when you mouse over them.)
  6. Drag and click to position the markup in the drawing.
  7. Optional: Click Copy to copy the markup content to the Windows clipboard.
  8. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.


Expand
titleMeasure a distance from arc center to edge
  1. Open the Linear menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Arc Center to Edge.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Click a radio button to select a measurement axis (the default is Normal).
    3. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on an arc and click. (Selectable arcs are highlighted when you mouse over them.) The selected arc remains highlighted.
  5. Select the edge. (Selectable edges are highlighted when you mouse over them.) The selected edge remains highlighted.
  6. The arc center and the measurement end point appear in yellow. Drag and click to position the markup in the drawing.
  7. Optional: Click Copy to copy the markup content to the Windows clipboard.
  8. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.


Expand
titleMeasure the distance between two arc centers
  1. Open the Linear menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Arc Center to Arc Center.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Click a radio button to select a measurement axis or for the distance between the arcs' centerlines (the default is Normal).
    3. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on an arc and click. (Selectable arcs are highlighted when you mouse over them.) The selected arc remains highlighted.
  5. Select the second arc.
  6. The arc center points appear in yellow. Drag and click to position the markup in the drawing.
  7. Optional: Click Copy to copy the markup content to the Windows clipboard.
  8. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.


Expand
titleCalculate the sum of the lengths of connected edges
  1. Open the Linear menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Sum of Connected Edges.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on an edge and click. (Selectable edges are highlighted when you mouse over them.) The selected arc remains highlighted.
  5. Select the next edge—it must be connected to the first. Continue selecting edges as needed. Double-click the last edge.
  6. The edge and end points are highlighted yellow. Drag and click to position the markup in the drawing.
  7. Optional: Click Copy to copy the markup content to the Windows clipboard.
  8. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.


Expand
titleMeasure minimum distance between edges
  1. Open the Linear menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Minimum Distance Between Edges.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Click a radio button to select a measurement axis (the default is Normal).
    3. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on an edge and click. (Selectable edges are highlighted when you mouse over them.) The selected edge remains highlighted.
  5. Select the second edge.
  6. The measurement end points appear in yellow. Drag and click to position the markup in the drawing.
  7. Optional: Click Copy to copy the markup content to the Windows clipboard.
  8. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.


Expand
titleCalculate boundary center by edges
  1. Open the Linear menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Boundary Center by Edges.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on an edge and click. (Selectable edges are highlighted when you mouse over them.) The selected edge remains highlighted.
  5. Continue selecting connected edges until SpinFire determines the intended boundary shape and calculates its center point.
  6. The boundary center point appears in yellow. Drag and click to position the markup in the drawing.
  7. Optional: Click Copy to copy the markup content to the Windows clipboard.
  8. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.


Expand
titleCalculate an area by boundary edges
  1. Open the Linear menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Boundary Area by Edges.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on an edge and click. (Selectable edges are highlighted when you mouse over them.) The selected edge remains highlighted.
  5. Continue selecting connected edges until SpinFire determines the intended boundary shape and calculates its area.
  6. The boundary area appears as a highlighted surface. You can hide this surface by right-clicking the markup and choosing Hide Surface.
  7. Drag and click to position the markup in the drawing.
  8. Optional: Click Copy to copy the markup content to the Windows clipboard.
  9. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.


Expand
titleCalculate an area by boundary points
  1. Open the Linear menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Boundary Area by Edges.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on the first point and click. (Crosshairs appear when you mouse over a selectable point.) The selected point is yellow.
  5. Continue selecting points as needed. Double-click the last point.
  6. Drag and click to position the markup in the drawing.
  7. Optional: Click Copy to copy the markup content to the Windows clipboard.
  8. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.


Expand
titleUsing Smart Dimension to measure an edge
  1. Click the Smart Edge Dimension icon on the 2D Document Toolbar.
  2. Mouse over and select a highlighted edge.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on an edge. (Selectable edges are highlighted when you mouse over them.)
    1. Double-click the left mouse button to measure the edge length (default).
    2. Or click the right mouse button to bring up a context menu containing additional measurement options, then make your selection. Image Removed
      Image Added
      If the edge you select is an arc, the context menu will contain more measurement choices.Image RemovedImage Added
  5. Drag and click to position the label in the scene.
 


Info
titleNote

If you want to add several of the same type of markup, you may select the Lock tool checkbox that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.




Panel
borderColor#23bfde
titleRadial Measurements


Expand
titleThe Radial Menu

Image Added


Expand
titleMeasure an arc diameter
  1. Open the Radial menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Arc Diameter.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Choose to show/hide the arc center point coordinates (the default is Show.
    3. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on an edge and click. (Selectable edges are highlighted when you mouse over them.) The selected edge remains highlighted in yellow.
  5. Drag and click to position the markup in the drawing.
  6. Optional: Click Copy to copy the markup content to the Windows clipboard.
  7. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.


Expand
titleMeasure an arc radius
  1. Open the Radial menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Arc Radius.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Choose to show/hide the arc center point coordinates (the default is Show).
    3. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on an edge and click. (Selectable edges are highlighted when you mouse over them.) The selected edge remains highlighted in yellow.
  5. Drag and click to position the markup in the drawing.
  6. Optional: Click Copy to copy the markup content to the Windows clipboard.
  7. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.


Expand
titleMeasure a circle defined by three points
  1. Open the Radial menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Circle by Three Points.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Choose to show/hide the arc center point coordinates (the default is Show).
    3. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on the first point and click. (Crosshairs appear when you mouse over a selectable point.) The selected point is yellow.
  5. Continue selecting the next two points. The resulting circle is drawn in yellow, and the markup contains the center point coordinates and diameter length.
  6. Drag and click to position the markup in the drawing.
  7. Optional: Click Copy to copy the markup content to the Windows clipboard.
  8. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.



Panel
borderColor#23bfde
titleAngular Measurements


Expand
titleThe Angular Menu

Image Added


Expand
titleMeasure an angle defined by three points
  1. Open the Angular menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Three Points Angle.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on the first point and click. (Crosshairs appear when you mouse over a selectable point.) The selected point is yellow.
  5. Select the second and third points. The second point will be the vertex point of the angle.
  6. Drag and click to position the markup in the drawing.
  7. Optional: Click Copy to copy the markup content to the Windows clipboard.
  8. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.
Info
titleNote

Once the markup label is displayed, you can also determine the reflex angle by using the Flip Axis command on the markup context menu. See The 2D Markup Context MenuWorking with 2D Markups for information on using this command and the context menu.



Expand
titleMeasure an angle defined by four points
  1. Open the Angular menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Four Points Angle.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on the first point and click, then select the second point. (Crosshairs appear when you mouse over a selectable point. A selected point is yellow). These two selections define the first side of the angle.
  5. Select the third and fourth points. These selections define the second side of the angle, which SpinFire extends to intersect with the first side.
  6. Drag and click to position the markup in the drawing.
  7. Optional: Click Copy to copy the markup content to the Windows clipboard.
  8. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.
Info
titleNote

Once the markup label is displayed, you can also determine the reflex angle by using the Flip Axis command on the markup context menu. See The 2D Markup Context MenuWorking with 2D Markups for information on using this command and the context menu.



Expand
titleMeasuring a two-edge angle
  1. Open the Angular menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Two Edge Angle.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Position your cursor on the first edge and click. (Selectable edges are highlighted when you mouse over them.)
  5. Select the second edge.
  6. Drag and click to position the markup in the drawing.
  7. Optional: Click Copy to copy the markup content to the Windows clipboard.
  8. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.
Info
titleNote

Once the markup label is displayed, you can also determine the reflex angle by using the Flip Axis command on the markup context menu. See The 2D Markup Context MenuWorking with 2D Markups for information on using this command and the context menu.




Changes made from the 2D Document Toolbar effect the appearance of notes and markups for the active document only and do not change the appearance of markups that already exist in the scene. If you want to change the appearance of existing markups, see The 2D Markup Context Menu.
 
Panel
borderColor#23bfde
titleOverriding default settings from the toolbar
Notes


Expand
titleThe Notes Menu

Image Added


Open the Length Units menu on the
Expand
titleChange length units
Add a point note
  1. Open the Notes menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Length Units icon Notes icon to see the unit listmenu of commands.)Image Removed
  2. Make your selection.
Expand
titleChange angular units
  1. Open the Angular Units menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Angular Units icon to see the unit list.)
    Image Removed
  2. Make your selection.
Expand
titleChange markup colors
  1. On the 2D Document Toolbar, click the Settings icon.
    Image Removed
  2. In the Options dialog box, click the appropriate COLOR… button.
    Image Removed
  3. In the Color dialog box, choose from Standard Colors or Recent Colors or create a new custom color.
    Image Removed
  4. Click OK.

To revert color changes back to default settings:

  1. On the 2D Document Toolbar, click the Settings icon again.
  2. In the Options dialog box, click the RESET TO DEFAULT button.
Expand
titleChange markup fonts
  1. On the 2D Document Toolbar, click the Settings icon.
    Image Removed
  2. In the Options dialog box, click the font name in the Label Fonts and Colors field.
    Image Removed
  3. In the Font dialog box, choose a new font, style, size, color, and/or effects.
    Image Removed 
  4. Click OK.
Expand
titleChange the background color
  1. In the 2D Document Toolbar, click the Background Color icon.
    Image Removed
  2. In the Color dialog box, choose from Standard Colors or Recent Colors or create a new custom color.
    Image Removed 
  3. Click the OK button.
Panel
borderColor#23bfde
titleUsing the browsers
Expand
titleShow/hide notes and markups
  1. Click the Markups icon on the 2D Browser Toolbar.
    Image Removed 
  2. Clear/select the note or markup checkbox to hide/show the label.
    Image Removed 
Expand
titleShow/hide drawing layers
  1. Click the Drawing icon on the 2D Browser Toolbar.
    Image Removed 
  2. Clear/select the node or layer checkbox to hide/show the object in the drawing.

All drawing components are visible.Image Removed

Drawing View 4 is hidden.Image Removed

 

Panel
borderColor#23bfde
titlePrinting
Expand
titlePrint a document
  1. From the Menu bar (see The SpinFire Ultimate User Interface), select File > Print Document… or click Image Removed in the Standard toolbar.
  2. In the Print Options dialog box, select to use the default print template or a custom template (see Using the Templates Editor).
  3. Click OK.
  4. In the Windows Print dialog box, select the options you want and click Print.
Expand
titlePreview your document before printing
  1. From the Menu bar (see The SpinFire Ultimate User Interface), select File > Print Preview... to see how your document will look on the printed page.
  2. You can adjust your view to examine the document (using the zoom, Zoom to Default Size, Fit to Width, or Fit to Page icons located in the upper-left of the display. These commands do not alter the way the document is printed.
  3. If you want to use a print template (*.tpl), enter the filename in the Apply Template field. (You can also use the [...] button to navigate to your template.) See Using the Templates Editor.
  4. If the view is satisfactory, click the printer icon to open the Windows Print dialog box.
  5. In the Windows Print dialog box, select the options you want and click Print.

Image Removed

Panel
borderColor#23bfde
title2D Markups
Expand
titleMove a 2D markup
  1. Right-click the markup to open the context menu. You can do this by clicking either the measurement label in the drawing or its listing in the Markups browser pane.
  2. Click+drag the markup into position. Be sure not to drag one of the handles, which will resize the markup.
Expand
titleChange the transparency of a 2D markup

You can change the transparency of the line, fill, and text of line, shape, and text box markups.

  1. Right-click the markup to open the markup context menu. You can do this by clicking either the measurement label in the drawing or its listing in the Markups browser pane. A selected markup appears highlighted.
  2. Open the Line Color, Fill Color, or Text Color menu from the 2D Document Toolbar.
  3. Click Transparency. This opens the Set Transparency dialog box.
  4. Use the slider to set the transparency.Click 2D Point Note. Mouse over your drawing. Highlighted edges designate where there are available points on the model. Crosshairs indicate the point where the label will attach. 
  5. When the label appears, drag it into position with your pointer.
  6. Click once to set the position of the label. A cursor will appear in the label.
  7. Type the text of your label and press Enter.
Info
titleNote
If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop



Expand
titleAdd an edge note
  1. Open the Notes menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Notes icon to see the menu of commands.)
  2. Click 2D Edge Note.
  3. Click the edge you wish to label. The edge is highlighted when the pointer is properly positioned. 
  4. When the label appears, drag it into position with your pointer.
  5. Click once to set the position of the label. A cursor will appear in the label.
  6. Type the text of your label and press Enter.
Info
titleNote
If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.



Expand
titleAdd a drawing note
  1. Open the Notes menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Notes icon to see the menu of commands.)
  2. Click Drawing Note. The label will appear.
  3. Drag the label into position with your pointer.
  4. Click once to set the position of the label. A cursor will appear in the label.
  5. Type the text of your label and press Enter.
Info
titleNote
If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.



Expand
titleAdd a 2D note
  1. Open the Notes menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Notes icon to see the menu of commands.)
  2. Click 2D Note. The label will appear.
  3. Drag the label into position with your pointer.
  4. Click once to set the position of the label. A cursor will appear in the label.
  5. Type the text of your label and press Enter.
Info
titleNote
If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.





Panel
borderColor#23bfde
titleOverriding default settings from the toolbar

Changes made from the 2D Document Toolbar effect the appearance of notes and markups for the active document only and do not change the appearance of markups that already exist in the scene. If you want to change the appearance of existing markups, see Working with 2D Markups.
 

Expand
titleChange length units
  1. Open the Length Units menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Length Units icon to see the unit list.)
    Image Added
  2. Make your selection.


Expand
titleChange angular units
  1. Open the Angular Units menu on the 2D Document Toolbar. (Click the drop-down arrow to the right of the Angular Units icon to see the unit list.)
    Image Added
  2. Make your selection.


Expand
titleChange markup colors
  1. On the 2D Document Toolbar, click the Settings icon.
    Image Added
  2. In the Options dialog box, click the appropriate COLOR… button.
    Image Added
  3. In the Color dialog box, choose from Standard Colors or Recent Colors or create a new custom color.
    Image Added
  4. Click OK.

To revert color changes back to default settings:

  1. On the 2D Document Toolbar, click the Settings icon again.
  2. In the Options dialog box, click the RESET TO DEFAULT button.


Expand
titleChange markup fonts
  1. On the 2D Document Toolbar, click the Settings icon.
    Image Added
  2. In the Options dialog box, click the font name in the Label Fonts and Colors field.
    Image Added
  3. In the Font dialog box, choose a new font, style, size, color, and/or effects.
    Image Added 
  4. Click OK.


Expand
titleChange the background color
  1. In the 2D Document Toolbar, click the Background Color icon.
    Image Added
  2. In the Color dialog box, choose from Standard Colors or Recent Colors or create a new custom color.
    Image Added 
  3. Click the OK button.



Panel
borderColor#23bfde
titleUsing the browsers


Expand
titleShow/hide notes and markups
  1. Click the Markups icon on the 2D Browser Toolbar.
    Image Added 
  2. Clear/select the note or markup checkbox to hide/show the label.
    Image Added 


Expand
titleShow/hide drawing layers
  1. Click the Drawing icon on the 2D Browser Toolbar.
    Image Added 
  2. Clear/select the node or layer checkbox to hide/show the object in the drawing.

All drawing components are visible.Image Added

Drawing View 4 is hidden.Image Added




Panel
borderColor#23bfde
title2D Markups


Expand
titleMove a 2D markup
  1. Right-click the markup to open the context menu. You can do this by clicking either the measurement label in the drawing or its listing in the Markups browser pane.
  2. Click+drag the markup into position. Be sure not to drag one of the handles, which will resize the markup.


Expand
titleChange the transparency of a 2D markup

You can change the transparency of the line, fill, and text of line, shape, and text box markups.

  1. Right-click the markup to open the markup context menu. You can do this by clicking either the measurement label in the drawing or its listing in the Markups browser pane.

  2. Open the Line Color, Fill Color, or Text Color menu from the 2D Document Toolbar.
  3. Click Transparency. This opens the Set Transparency dialog box.
  4. Use the slider to set the transparency.


Expand
titleChange properties of a 2D markup
  1. Right-click a dimension markup to make changes to its properties.
  2. A context menu will appear and provide command options that are based on the selected markup type.
    1. For example, a Point Coordinates markup context menu will differ slightly from an Arc Center to Arc Center markup context menu. (See the Working with 2D Markups for details.)
  3. Modify the desired information, such as.
    1. Font
    2. Background Color
  4. Add a Description or Comment



Panel
borderColor#23bfde
title2D Drawings


Expand
titleTransform a 2D Drawing
  1. Right-click the drawing under "Drawings, such as "Sheet", or "Model"
  2. Select Transform
  3. Image Added
  4. Select either
    1. Move
    2. Rotate
    3. Scale
  5. Key in the values
  6. Select Apply

Image Added