 |
 |  |  |
Version SAM 1.10.0 - - unreleased
CSAM-816 - Fix Ansys ETBLOCK import in Ansys Mechanical APLD
ETBLOCK import is fixed in Ansys Mechanical APDL.
CSAM-796 - Distribute the Data Provider Framework
Custom reader plugins based on the Data Provider Framework can now be loaded in Access and provide mesh and result information.
CSAM-808 - Option to set the absolute path to OpenFOAM etc directory
An option to set the absolute path to the include etc directory of OpenFoam is added. This path can be set through vdm_OpenFOAMLibSetString or vdm_DataFunSetString with the VDM_OPENFOAM_ETC_PATH type.
CSAM-555 - enforce Cgns write of GridLocation
Enforce Cgns to write the GridLocation_t node in the GridConnectivity_t node even in Vertex is the default.
CSAM-768 - AnsLib: add element node temperature on Surface element
in ANSLib library, element node temperatures are read on surface element types SURF152 and SURF154
CSAM-801 - Added OpenFOAM, CGNS, Nastran H5 readers dependency to the third-party folder.
CSAM-801: Added CGNS, HFD5 in the third-party folder.
Now the Evaluation of CEETRON Access is able to open: OpenFOAM, Nastran H5 and CGNS files.
CSAM-780 - Nasfil reads NLPARM definitions per Subcase
NasFil library: handle multiple definitions of NLPARM Bulk Data entries when Control Case commands NLPARM are defined at SUBCASE levels
CSAM-765 - Fixing the free type factor in order to avoid missing character names at the top while displaying
sijo.george@techsoft3d.com
Fixed the issue related to the displaying characters with top part missing when using FreeType and Arial bold font.
CSAM-766 - Updating the internal ZLIB to 1.3.1
sijo.george@techsoft3d.com
The internal ZLIB is updated to 1.3.1
CSAM-676 - Added experimental_vis_SurfMeshGenerate method to perform remeshing in parallel
Added vis_SurfMesh_EXPERIMENTAL_Generate(vis_SurfMesh* p, vis_Connect* connect) method to perform surface remeshing in parallel.
Added as an experimental API that is encouraged to be used for internal testing but not for production. The feature might be incomplete but it is ready for testing and feedback.
Please refer to the documentation for more information also added vis_SurfMesh_EXPERIMENTAL_SetPartitionStrategy(vis_SurfMesh* p, Vint iterationCount, Vint* partitionPerIteration);
CSAM-788 - Manage #includeEtc keyword in OpenFOAM
"#includeEtc" OpenFOAM keyword management has been added. Files included this way are version specific and not included by default in the set of result files. If used, this included files must be added to the set of result files to be processed by Access.
CSAM-787 - RBE2 APLHA values from Nastran input are not read correctly
RBE2 APLHA values from Nastran input deck were not read correctly when several RBE2 were defined in the input.
CSAM-790 - fix D3DLib import Solid strain tensor results
Fix D3DLib import Strain tensor on solid elements when thermal strain and/or plastic strain tensor is active
CSAM-775 - Provide METIS and GKlib third party librairies in the distribution
METIS and GKlib librariries are provided with the distribution and linked by default with the sources.
CSAM-776 - Improved management of anistrotropic materials in Ansys
Anisotropic elastic material stiffnesses, coefficients of thermal expansion and thermal conductivities can be read from and exported to Ansys input files.
CSAM-791 - Exporting the right node ID into the EBLOCK of Ansys cdb file
sijo.george@techsoft3d.com
Fixed the issue related to writing of node ids in the EBLOCK of Ansys cdb
CSAM-691 - Support of Ansys smeared reinforcing elements
Ansys smeared reinforcing element REINF265 are supported in Ansys input files (through ANSFil) and result files (through ANSLib). A new element type SYS_ELEM_REINFORCEMENT is added for reinforcing elements.
CSAM-789 - Avoid the crash on freeing memory of state object
sijo.george@techsoft3d.com
Avoided the crash related to freeing memory of state object
CSAM-779 - Reading and writing applied restraint cases (SPC) on velocity of the nodes in Ansys cdb file
sijo.george@techsoft3d.com
Reading and wrtiting applied restraint cases (SPC) on the velocity of the nodes in Ansys cdb file (VELX, VELY and VELZ) are supported
CSAM-555 - CGNS write model supports now abutting meshes with multiZones
CGNS export: allow multiple Cell Zones option. Each 3D Cells part will be exported in a dedicated CGNS Zone.
The 1to1 Abutting meshes are supported and corresponding data are written in a CGNS a ZoneGridConnectivity_t node.
The required API call is below:
vdm_CGNSVLibSetMode(cgnslib, VDM_CGNS_MULTIZONESEXPORT, SYS_ON);
CSAM-772 - Fixed an issue related to a SYS_ERROR_VALUE error obtained while creating CE cards in Ansys cdb file.
sijo.george@techsoft3d.com
Fixed an issue related to a SYS_ERROR_VALUE error obtained while creating CE cards in Ansys cdb file.
CSAM-745 - Support Abaqus odb Coupling Constraints as SYS_ELEM_RIGID
Abaqus coupling constraints elements (Kinetamic or Distributing couplings) can be retrieved form Abaqus .odb result files.
CSAM-747 - Support of predefined MPC type ELBOW in Abaqus input files
The predefined MPC type ELBOW is supported in Abaqus input files. Other predefined type TIE, PIN, LINK and BEAM only stored two nodes even when node sets with more than two nodes were used to define them. This is also fixed.
CSAM-748 - Long part name in Fluent .cas files was causing memory violation issue
sijo.george@techsoft3d.com
Part names longer than 20 characters in Fluent .cas mesh files were causing memory violation issues while accessing them.
CSAM-586 - Exporting FamilyName_t node in CGNS file with boundary condition information
sijo.george@techsoft3d.com
FamilyName_t and Family_t nodes are created while exporting CGNS file to contain the boundary condition info. In this case, the BC_t nodes will be noted as FamilySpecified.
The required API call is below:
vdm_CGNSVLibSetMode(cgnslib, VDM_CGNS_FAMILYSPECIFIED, SYS_ON);
CSAM-586 - Exporting FamilyName_t node in CGNS file with boundary condition information
sijo.george@techsoft3d.com
FamilyName_t and Family_t nodes are created while exporting CGNS file to contain the boundary condition info. In this case, the BC_t nodes will be noted as FamilySpecified.
The required API call is below:
vdm_CGNSVLibSetMode(cgnslib, VDM_CGNS_FAMILYSPECIFIED, SYS_ON);
CSAM-762 - Fix Nastran input file reader with free field format
Reading large Nastran input files written with the free field format could lead to memory violations and crashes.
CSAM-680 - NASLib Cyclic Mode results are stored in the Local Cylindrical System
In the NASLib reader, fix the local system type and Id on which stresses and strains are written in case of Cyclic Mode analysis. The tensors are now available in the local cylindrical system
Version SAM 1.9.6 - - 658cd32e
...