Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 43 Next »

Prior to installing the new floating license software, ensure the following:

  1. A Windows-based server (Windows 7/8, Windows 2008/2012 Server, 32 or 64Bit) is available for the installation. Actify can provide either 32-bit or 64-bit Floating License Server software; the installation procedure is the same for both.

  2. Have provided the server name and mac adddress to Actify for the Floating license.

  3. Obtain the two necessary floating license files: license.al and sfpflv2.dat from Actify.

Then proceed with the installation:

  1. Download the appropriate installation package.
    1. ActifyFloatingLicenseServer.x64.exe for 64-bit systems.
    2. ActifyFloatingLicenseServer.x86.exe for 32-bit systems.
  2. Double-click the file name to start the InstallShield Wizard. 
  3. On the welcome screen, click Next to continue.
     
  4. Next, read the Software License Agreement. To continue the installation, click the I accept the terms in the license agreement radio button. then Next. 
  5. The next screen allows you to browse for and select your sfpflv2.dat file (see above). The installation will automatically place this in the correct folder. Click the Next button.
    (If you have not received a the license file, click the Next button to continue.)
  6. Click the Install button.
  7. A status bar shows the progress of the installation. Installation takes less than three minutes to complete.
  8. The final screen lets you know the installation is complete. Press the Finish button to exit.

Post Installation

The license manager software is installed in the C:\Program Files\Actify\Floating License Manager folder (for 64-bit). You can verify the files have been installed there.

If you didn't supply the .dat file earlier (Step 5), you need to manually configure the floating license server. To do this:

  1. Copy the sfpflv2.dat file to the C:\Program Files\Actify\Floating License Manager folder.
  2. Start the lmtools.exe. 
  3. Select the Config Services tab.



  4. Enter the Service Name as Actify License Manager.
  5. Browse and find the lmgrd.exe path.
  6. Browse and find the sfpflv2.dat path.
  7. Make sure Start Server at Power Up and Use Services are checked.
  8. Click on the Save Service button.

  9. Select the Start/Stop/Reread tab.
  10. Click Start Server.
  11. Click ReRead License File.

Important Note

Server

If a floating license server already exists for SpinFire 10.x,

  1. Uninstall 9.2 FlexLM and install the new license server (see New License Server Installation on this page).
  2. Replace the sfpflv2.dat file with the new one, and perform a Stop, Start, ReRead.

Clients

If, on startup, SpinFire Ultimate 11.0 does not locate the new license file in the spinfire11 folder, it will search for an existing SpinFire 10.x license file, working backward to version 10.0. If found, the license file is then copied to the spinfire11 folder.

Should this occur, /wiki/spaces/SF1100/pages/3233285414 may be required to update the license file expiration date.

Firewall Configuration

The server system must allow for two programs to communicate across the network. Configure the firewall to allow the actifyd.exe and lmgrd.exe programs through:

  1. Go to Control Panel > Windows Firewall (If you are in Category view, you might need to go into System & Security first.)
  2. Go to Advanced Settings in Windows Firewall (located in the action list on the left side).
  3. Go to Inbound rules (located under the root item of the file tree on the left).
  4. Create a new rule (you can right click on Inbound rules > New Rule, or, select the action "New Rule" from the list on the right).
  5. Select Rule Type as Program. Click Next.
  6. Select This Program Path and browse to lmgrd.exe (the new 64 bit lmgrd). Click Next.
  7. Select Allow the connection. Click Next.
  8. Select Domain, Private, Public (three checkboxes). Click Next.
  9. Give a name to the rule (e.g., Actify_LMGRD). Click Finish.
  10. Repeat the steps above for actifyd.exe (located in the same folder as lmgrd.exe).

Related Topics

Activating SpinFire Ultimate

Update License on Floating License Manager

Floating License Changing Ports

 

  • No labels