Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

See also Measurement Tips.

Tube length Measurement dialog box

From: Working with Advanced Linear Menu

 Measure tube length
  1. Open the Advanced Linear menu on the 3D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
  2. Select Tube Length.

    The Tube Length Measurement dialog box provides the following options:
    1. Auto Complete - Signals SpinFire to automatically traverse the pipe — following all the straights and bends — to determine its length. Selected by default.

      Note: If you choose to clear the checkbox, you will need to manually select each arc from the beginning of the pipe to its end. During selection, if a mistake is made, you will need to restart the selection process. However, manual selection can be useful when you want to measure only a portion of the tube.

    2. Lock tool - Select to use the command more than once.
    3. Hyperlink - Enter a link to a file or to a document and user view within the current file.
  3. Position your cursor on the starting arc or circle and double-click. (Selectable arcs and circles are highlighted as you mouse over them.) The selected arc or circle remains highlighted.
  4. Position your cursor on the ending arc or circle. 
    1. Click once to see a highlighted line that indicates the shortest distance between the two arcs. 
    2. Double-click to accept the measurement and see the markup label. 
  5. Position the markup, then click once. The highlighted line changes color to indicate that the measurement is complete.
  6. At this point, you have the following options:
    1. Click Copy to copy the markup content to the Windows clipboard.
    2. Click Export... to save the markup content to a .csv file.
    3. Click Stop when you're finished taking multiple measurements.
    4. Click Close (or X) to end the command and close the dialog box.

Recommendation

To find arcs and circles more easily, select your model and render as Smooth with Edges. See also Measurement Tips.

 

  • No labels