Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Angular Dimensions . . .
 Measure a three-point angle
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available commands.)
  2. Select Three Vertices Angle. Red dots designate available points on the model.
  3. Optional: Navigate to or enter a hyperlink to a file or a ???.
  4. Click three points on the model. The second point you select will be the vertex of the angle. Crosshairs indicate when the pointer is properly positioned over a point.
  5. Drag the label into position and click once.

Note

To cancel this operation, press Esc on your keyboard.

If red dots do not appear on the model when you call the command, you may need to go to the 3D Viewer Settings page and click the Points Visible on Picking checkbox.

You can measure the reflex angle by right-clicking the label and selecting Flip Axis from the context menu.

If you want to add several of the same type of markup, you may select the Lock tool checkbox that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.

 Measure a two-edge angle
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available commands.)
  2. Select Two Edge Angle.
  3. Optional: Navigate to or enter a hyperlink to a file or a ???.
  4. Click an edge on the model. The edge is highlighted when the pointer is properly positioned.
  5. Click a co-planar edge on the model.
  6. Drag the label into position and click once.

Note

To cancel this operation, press Esc on your keyboard.

If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.

 Measure the angle between a surface point and a point
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available commands.)
  2. Select Surface Point to Point Angle.
  3. Optional: Navigate to or enter a hyperlink to a file or a ???.
  4. Click on a surface. A surface is highlighted when the pointer is properly positioned.
  5. Click a point on the model. Red dots designate available points on the model. Crosshairs indicate when the pointer is properly positioned over a point.
  6. Drag the label into position and click once.

Note

To cancel this operation, press Esc on your keyboard.

If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.

 Measure the angle between a point on a surface and an edge
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available commands.)
  2. Select Surface Point to Edge Angle.
  3. Optional: Navigate to or enter a hyperlink to a file or a ???.
  4. Click on a surface of the model. A surface is highlighted when the pointer is properly positioned.
  5. Click an edge on the model. The edge is highlighted when the pointer is properly positioned for selection.
  6. Drag the label into position and click once.

Note

To cancel this operation, press Esc on your keyboard.

If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.

 Measure the angle defined by points on two surfaces
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available commands.)
  2. Select Surface Point to Surface Point Angle.
  3. Optional: Navigate to or enter a hyperlink to a file or a ???.
  4. Click a surface on the model. A surface is highlighted when the pointer is properly positioned.
  5. Click another surface on the model.
  6. Drag the label into position and click once.

Note

To cancel this operation, press Esc on your keyboard.

If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.

 Measure a two-point draft angle
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available commands.)
  2. Select Two Points Draft Angles.
  3. Optional: Navigate to or enter a hyperlink to a file or a ???.
  4. By default, the Two Points Draft Angles command measures the angle along the Z-Axis. To choose another axis, click the appropriate radio button in the Two Points Draft Angle Measurement dialog box.
  5. Click two points on the model. The second point you select will be the vertex of the angle.
  6. Drag the label into position and click once.

Note

To cancel this operation, press Esc on your keyboard.

You can change or flip the direction of the axis segment used to form the angle by right-clicking the label and selecting Flip Axis from the context menu.

To change the main axis, mouse over the markup label and right-click to view the context menu.

If red dots do not appear on the model when you call the command, you may need to go to the 3D Viewer Settings page and click the Points Visible on Picking check box.• You can change the main axis from the right-click context menu.

If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.

 Measure a draft angle using a surface point
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available commands.)
  2. Select Surface Draft Angle.
  3. Optional: Navigate to or enter a hyperlink to a file or a ???.
  4. By default, the Surface Draft Angle command measures the angle along the Z-Axis. To choose another axis, click the appropriate radio button in the Surface Draft Angle Measurement dialog box.
  5. Click a surface on the model.
  6. Drag the label into position and click once.

Note

To cancel this operation, press Esc on your keyboard.

You can change or flip the direction of the axis segment used to form the angle by right-clicking the label and selecting from the context menu.

To change the main axis, mouse over the markup label and right-click to view the context menu.

If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.

Angular Dimension Markup Context Menu

Working with Markups and Notes
 Hide/show a label
  1. Click the label name to hide or show in the scene.
 Flip the axis

 

 Set markup measurement units
  1. Right-click the markup dimension label itself or the name of the label in the Markups browser pane to open the context menu.
  2. Select Units, then click your choice of units on the flyout menu.

Note

Select Display Units on the flyout menu to show/hide measurement units in the label.

Select As Environment on the flyout menu to show/hide . . .

WHAT IS AS ENVIRONMENT?

 Set number of decimal places displayed in the measurement
  1. Right-click the markup dimension label itself or the name of the label in the Markups browser pane to open the context menu.
  2. Select Decimal Places, then click your choice on the flyout menu.
 Keep a label in front of the model
  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu.
  2. Click Stay on Top. The Stay on Top setting has a check mark beside it when it is enabled.

Note

Markup labels (with the exception of a 2D Note) rotate along with your view of the model. This can result in the label appearing behind the model. You can prevent this with the Stay on Top setting.

Follow this same procedure to disable the Stay on Top setting.

 Lock a label in position
  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu.
  2. Click Lock Position. The Lock Position setting has a check mark beside it when it is enabled.

Note

Follow the same procedure to disable the Lock Position setting.

The labels with the Lock Position setting enabled will still rotate with the view of the model. Lock Position only prevents the label from being moved with a drag operation. See "Keep a label in front of the model" on this page.

 Copy note text to the Windows clipboard

NOT YET IMPLEMENTED

  1. Right-click the note itself or the name of the note in the Markups pane to open the context menu. (See The SpinFire Professional 11.0 User Interface and Browsers.)
  2. Select Copy.The text is copied to your Windows Clipboard. It can then be pasted into any document with the Windows Paste command.

You can also copy an entire markup label (not just the text) and paste it into the 3D scene. Just copy the label, then right-click either Notes or Dimensions in the Markups tab (depending on the type of label you want to paste), and select Paste. A copy of the label will be pasted in the 3D scene.

 Delete a label
  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu.
  2. Click Delete on the menu.A dialog box asks you to confirm your delete.

Note

Deleting a Note or Markup Dimension label removes it permanently. If you would rather temporarily hide a label, see "Hide/show a label" on this page.
 Position a label

To move a markup label, simply drag it to the position you desire.

A line (or lines) will always indicate the spot on the model to which the label is attached.

Note

If you are unable to reposition a label, the Lock Position option might be enabled. See "Lock a label in position" on this page.

Properties

 Add or edit a note title
  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Professional 11.0 User Interface and Browsers.) All hidden and visible note and dimension labels are listed.
  2. Click Properties. This opens the Markup Properties dialog box.
  3. Click in the Title: field and type your new label text.
  4. Click OK.

Note

This text is the same as the note title that appears in the Markups pane.

 Change the font and background used in a label
  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Professional 11.0 User Interface and Browsers.) All hidden and visible note and dimension labels are listed.
  2. Click Properties.This opens the Markup Properties dialog box.
  3. Click [font name]....This opens the Font dialog box. (See also 3D Viewer Settings.)
  4. Select the desired font settings and click OK.
  5. Click Background... to open the Color dialog box.
  6. Select the background color for the label and click OK.

Note

A preview of the selected font and background is shown in the Properties dialog box.

This procedure changes the font of the selected label only. See also 3D Viewer Settings.

 Change the color of markup label arrows and lines
  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Professional 11.0 User Interface and Browsers.) All hidden and visible note and dimension labels are listed.
  2. Click Properties. This opens the Markup Properties dialog box.
  3. Click the Color... button associated with either Arrow or Line to open the Color dialog box.
  4. Click the desired color and click OK.

Note

This procedure changes the color of the selected label only. See also 3D Viewer Settings.
 Add a link to a markup label
  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Professional 11.0 User Interface and Browsers.) All hidden and visible note and dimension labels are listed.
  2. Click Properties.This opens the Markup Properties dialog box
  3. Click in the Hyperlink box.
  4. Type the path of the Web page or file you want to link to. Or click the folder icon to browse to a local file.
  5. Click OK.The text of the label should be underlined.

Note

Examples of valid link paths include:

To link to a user view, type the pound sign # and the name of the saved view.

To link to another document within the .3D file, surround the name of the document with square brackets [ ]. For example, a link [Wheel] would open the Wheel document.

If you would like to link a user view within a 3D document add the pound sign # and the viewname. For example, the link [Wheel]#view2 would open the Wheel document and display the view named view2.

SpinFire 11.0 will append the http:// protocol header to any relative link. Therefore, links to files must use an absolute path.

 Add or edit a label description or comment

To add or edit a description

  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Professional 11.0 User Interface and Browsers.) All hidden and visible note and dimension labels are listed.
  2. Click Properties.This opens the Markup Properties dialog box.
  3. Click in the Description box and type your comment.
  4. Click OK.The description will appear on the lable beneath the original measurement or note.

To add or edit a comment

  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Professional 11.0 User Interface and Browsers.) All hidden and visible note and dimension labels are listed.
  2. Click Properties.This opens the Markup Properties dialog box.
  3. Click in the Comments box and type your comment.
  4. Click OK. A mark should appear in the lower-right corner of the label, indicating the presence of a comment.
 User Views

Note

 

 Add Markup to Another View

Note

 

 Move Markup to Another View

Note

 

 Remove Markup from View

Note

 

  • No labels