Page Comparison

Once the floating license server has been set up, SpinFire Ultimate can be activated.

There are three different activation methods.

Use the Seat ID and Activate Online.
Use the license.al file by using the Read License File button.
Place license.al and sfpflv.dat in the C:\ProgramData\Actify\Spinfire11 folder and reopen SpinFire
Use the new Server Activation feature (Seat ID and license.al files are not required).

Option 1 - Activate Online Method

Image Removed

Option 2 – Activate Manually Method

If you’re experiencing an issue with Option One, you should “read the License file” manually through SpinFire. This is done by clicking on “Read License File” and browsing the location of the latest License.al you have , this will then activate SpinFire.

Image Removed

Option 3 - Alternative Manual activation Method

If SpinFire does not activate through Option 1 or 2 , you may need try the following:

Copy the latest license.al and sfpflv.dat to this location:

Image Removed

Then close SpinFire if it is open and reopen to check it has activated on the Home Page

If you do not see ProgramData on your C Drive, you’ll need to open the C Drive and select Options

Image Removed

Then click the View tab and tick “Show Hidden Files, Folders and Drives” and click OK

Image Removed

On the Home page, you should see “Floating License” ticked to confirm you’ve successfully activated SpinFire.

Image Removed

If it then errors regarding an importer when you try to open a file, you may need to review the Floating License Manager logs and if there’s errors on the server, to escalate to your I.T or the Actify Support team. When doing so, please provide a copy of your machine’s dxdiag that SpinFire is installed on, as well as your SpinFire.log file (C:\ProgramData\Actify\SpinFire11\Logs)

Option 4 - Server Activation Method

Click the Change Server Parameters... button

Floating License Server Activation

To activate a floating license you must enter the Server Name, the MAC address and the Server port (if one is specified on the server, your I.T colleague can confirm), the details must all be accurate for the activation or license server status to successfully work.

Enter the Server Name and Server MAC Address. Click the OK button.
Confirm the changes.
Click the License Server Status button to see the number of licenses used and when the license was taken.
Click the Activate Floating License button.

If the activation fails, the following error message appears indicating that the application is in Reader Mode. Verify that the server name and MAC address are correct and try again.