Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Panel
borderColor#23bfde
titleAngular Dimensions . . .Create an Angular Dimension Markup


Expand
titleMeasure a three-point angle
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available Linear icon to see the menu of commands.)
  2. Select Select Three Vertices Angle. Red dots designate available points on the model.Optional: Navigate to or enter Points Angle.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or
    a ???.Click three points on the model
    1. to a document and user view within the current file.
  4. Position your cursor on the first point and click. (Crosshairs appear when you mouse over a selectable point.) The selected point is yellow.
  5. Select the second and third points. The second point you select will be the vertex point of the angle. Crosshairs indicate when the pointer is properly positioned over a point.
  6. Drag the label into position and click once.
  7. Optional:
    1. Click Copy to copy the markup content to the Windows clipboard.
  8. Click Stop when you're finished taking multiple measurements. Click Close (or X) to end the command and close the dialog box.
Info
titleNote

To cancel this operation, press Esc on your keyboard.

If red dots do not appear on the model when you call the command, you may need to go to the 3D Viewer Settings page and click the Points Visible on Picking checkbox.

You can measure the reflex angle by right-clicking the label and selecting Flip Axis from the context menu.

If you want to add several of the same type of markup, you may select the Lock tool checkbox that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click StopOnce the markup label is displayed, you can also determine the reflex angle by using the Flip Axis command on the markup context menu. See Working with 3D Markups for information on using this command and the context menu.



Expand
titleMeasure a two-edge angle
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available commands.)
  2. Select Select Two Edge Angle to view the Two Edge Angle Measurement dialog box.
  3. Optional: Navigate to or enter
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or
    a ???
    1. to a document and user view within the current file.
  4. Click an edge on the model. The edge is highlighted when the pointer is properly positioned.
  5. Click a co-planar edge on the model.
  6. Drag the label into position and click once.
  7. Click Stop when you're finished taking measurements; at this point, you can still copy the most recent measurement to the WIndows clipboard. Select Close (or X) to end the command and close the dialog box.
Info
titleNote

To cancel this operation, press Esc on Press Esc on your keyboard .If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stopto cancel the operation.



Expand
titleMeasure a two-surface angle
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available commands.)
  2. Select Two Surfaces Angle to view the Two Surface Angle Measurement dialog box.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Click an surface on the model. The surface is highlighted when the pointer is properly positioned.
  5. Click another surface on the model.
    Note: The two surfaces chosen must be either two planar, non-parallel surfaces or one cylindrical and one planar surface.
  6. Drag the label into position and click once.
  7. Click Stop when you're finished taking measurements; at this point, you can still copy the most recent measurement to the WIndows clipboard. Select Close (or X) to end the command and close the dialog box.
Info
titleNote

Press Esc on your keyboard to cancel the operation.



Expand
titleMeasure the angle between a surface point and a point
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available commands.)
  2. Select Surface Point to Point Angle to view the Surface Point to Point Angle dialog box.
  3. Optional: Navigate to or enter
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or
    a ???
    1. to a document and user view within the current file.
  4. Click on a surface. A surface is highlighted when the pointer is properly positioned.
  5. Click a point on the model. Red dots designate available points on the model. Crosshairs indicate when the pointer is properly positioned over a point.
  6. Drag the label into position and click once.
  7. Click Stop when you're finished taking measurements; at this point, you can still copy the most recent measurement to the WIndows clipboard. Select Close (or X) to end the command and close the dialog box.
Info
titleNote

To cancel this operation, press Esc on your keyboard.

If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.Press Esc on your keyboard to cancel the operation.



Expand
titleMeasure the angle between a point on a surface and an edge
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available commands.)
  2. Select Surface Point to Edge Angle to view the Surface Point to Edge Angle dialog box.
  3. Optional: Navigate to or enter
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or
    a ???
    1. to a document and user view within the current file.
  4. Click on a surface of the model. A surface is highlighted when the pointer is properly positioned.
  5. Click an edge on the model. The edge is highlighted when the pointer is properly positioned for selection.
  6. Drag the label into position and click once.
  7. Click Stop when you're finished taking measurements; at this point, you can still copy the most recent measurement to the WIndows clipboard. Select Close (or X) to end the command and close the dialog box.
Info
titleNote

To cancel this operation, press Esc on your keyboard.

If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.Press Esc on your keyboard to cancel the operation.



Expand
titleMeasure the angle defined by points on two surfaces
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available commands.)
  2. Select Surface Point to Surface Point Angle to view the Surface Point to Surface Point Angle dialog box.
  3. Optional: Navigate to or enter
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or
    a ???
    1. to a document and user view within the current file.
  4. Click a surface on the model. A surface is highlighted when the pointer is properly positioned.
  5. Click another surface on the model.
  6. Drag the label into position and click once.
  7. Click Stop when you're finished taking measurements; at this point, you can still copy the most recent measurement to the WIndows clipboard. Select Close (or X) to end the command and close the dialog box.
Info
titleNote

To cancel this operation, press Esc on your keyboard.

If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click StopPress Esc on your keyboard to cancel the operation.



Expand
titleMeasure the angle defined by a surface point and the tangent of an arc or circle.
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available commands.)
  2. Select Surface Point to Circle Tangent Angle to view the Surface Point to Circle Tangent Angle dialog box.
  3. Optional:
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or to a document and user view within the current file.
  4. Click a surface on the model. A surface is highlighted when the pointer is properly positioned.
  5. Click an arch or circle on the model..
  6. Drag the label into position and click once.
  7. Click Stop when you're finished taking measurements; at this point, you can still copy the most recent measurement to the WIndows clipboard. Select Close (or X) to end the command and close the dialog box.
Info
titleNote

Press Esc on your keyboard to cancel the operation.



Expand
titleMeasure a two-point draft angle
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available commands.)
  2. Select Two Points Draft Angles to view the Two Points Draft Angles dialog box.
  3. Optional: Navigate to or enter
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or
    a ???
    1. to a document and user view within the current file.
  4. By default, the Two Points Draft Angles command measures the angle along the Z-Axis. To choose another axis, click the appropriate radio button in the Two Points Draft Angle Measurement dialog box.
  5. Click two points on the model. The second point you select will be the vertex of the angle.
  6. Drag the label into position and click once.
  7. Click Stop when you're finished taking measurements; at this point, you can still copy the most recent measurement to the WIndows clipboard. Select Close (or X) to end the command and close the dialog box.
Info
titleNote

To cancel this operation, press Esc on Press Esc on your keyboard to cancel the operation.

You can change or flip the direction of the axis segment used to form the angle by right-clicking the label and selecting Flip Axis from the context menu.

To change the main axis, mouse over the markup label and right-click to view the context menu.

If red dots do not appear on the model when you call the command, you may need to go to the 3D Viewer Settings page and click the Points Visible on Picking check box.• You can change the main axis from the right-click context menu.

If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.



Expand
titleMeasure a draft angle using a surface point
  1. Open the Angular menu on the 3D Document Toolbar. (How? Click the drop-down arrow to the right of the Angular icon. You should see a drop-down menu listing the available commands.)
  2. Select Surface Draft Angle to open the Surface Draft Angle dialog box.
  3. Optional: Navigate to or enter
    1. Select Lock tool to use the command more than once.
    2. Enter a hyperlink to a file or
    a ???
    1. to a document and user view within the current file.
  4. By default, the Surface Draft Angle command measures the angle along the Z-Axis. To choose another axis, click the appropriate radio button in the Surface Draft Angle Measurement dialog box.
  5. Click a surface on the model.
  6. Drag the label into position and click once.
  7. Click Stop when you're finished taking measurements; at this point, you can still copy the most recent measurement to the WIndows clipboard. Select Close (or X) to end the command and close the dialog box.
Panel
borderColor#23bfde
titleWorking with Markups and Notes
Expand
titleHide/show a label
Click the label name to hide or show in the scene
Info
titleNote

To cancel this operation, press Esc on Press Esc on your keyboard to cancel the operation.

You can change or flip the direction of the axis segment used to form the angle by right-clicking the label and selecting from the context menu.

To change the main axis, mouse over the markup label and right-click to view the context menu.

If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.

Angular Dimension Markup Context Menu

Image Removed

.

Expand
titleFlip the axis

 

Expand
titleSet markup measurement units



Right-click

the markup dimension label itself or the name of the label in the Markups browser pane to open the context menu.
  • Select Units, then click your choice of units on the flyout menu.
  • Info
    titleNote

    Select Display Units on the flyout menu to show/hide measurement units in the label.

    Select As Environment on the flyout menu to show/hide . . .

    WHAT IS AS ENVIRONMENT?

    Expand
    titleSet number of decimal places displayed in the measurement
    1. Right-click the markup dimension label itself or the name of the label in the Markups browser pane to open the context menu.
    2. Select Decimal Places, then click your choice on the flyout menu.
    Expand
    titleKeep a label in front of the model
    1. Right-click the label itself or the name of the label in the Markups pane to open the context menu.
    2. Click Stay on Top. The Stay on Top setting has a check mark beside it when it is enabled.
    Info
    titleNote

    Markup labels (with the exception of a 2D Note) rotate along with your view of the model. This can result in the label appearing behind the model. You can prevent this with the Stay on Top setting.

    Follow this same procedure to disable the Stay on Top setting.

    Expand
    titleLock a label in position
    1. Right-click the label itself or the name of the label in the Markups pane to open the context menu.
    2. Click Lock Position. The Lock Position setting has a check mark beside it when it is enabled.
    Info
    titleNote

    Follow the same procedure to disable the Lock Position setting.

    The labels with the Lock Position setting enabled will still rotate with the view of the model. Lock Position only prevents the label from being moved with a drag operation. See "Keep a label in front of the model" on this page.

    Expand
    titleCopy note text to the Windows clipboard

    NOT YET IMPLEMENTED

    1. Right-click the note itself or the name of the note in the Markups pane to open the context menu. (See The SpinFire Professional 11.0 User Interface and Browsers.)
    2. Select Copy.The text is copied to your Windows Clipboard. It can then be pasted into any document with the Windows Paste command.

    You can also copy an entire markup label (not just the text) and paste it into the 3D scene. Just copy the label, then right-click either Notes or Dimensions in the Markups tab (depending on the type of label you want to paste), and select Paste. A copy of the label will be pasted in the 3D scene.

    Expand
    titleDelete a label
    1. Right-click the label itself or the name of the label in the Markups pane to open the context menu.
    2. Click Delete on the menu.A dialog box asks you to confirm your delete.
    Info
    titleNote
    Deleting a Note or Markup Dimension label removes it permanently. If you would rather temporarily hide a label, see "Hide/show a label" on this page.
    Expand
    titlePosition a label

    To move a markup label, simply drag it to the position you desire.

    A line (or lines) will always indicate the spot on the model to which the label is attached.

    Info
    titleNote
    If you are unable to reposition a label, the Lock Position option might be enabled. See "Lock a label in position" on this page.

    Properties

    Expand
    titleAdd or edit a note title
    1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Professional 11.0 User Interface and Browsers.) All hidden and visible note and dimension labels are listed.
    2. Click Properties. This opens the Markup Properties dialog box.
    3. Click in the Title: field and type your new label text.
    4. Click OK.
    Info
    titleNote

    This text is the same as the note title that appears in the Markups pane.

    Expand
    titleChange the font and background used in a label
    1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Professional 11.0 User Interface and Browsers.) All hidden and visible note and dimension labels are listed.
    2. Click Properties.This opens the Markup Properties dialog box.
    3. Click [font name]....This opens the Font dialog box. (See also 3D Viewer Settings.)
    4. Select the desired font settings and click OK.
    5. Click Background... to open the Color dialog box.
    6. Select the background color for the label and click OK.
    Info
    titleNote

    A preview of the selected font and background is shown in the Properties dialog box.

    This procedure changes the font of the selected label only. See also 3D Viewer Settings.

    Expand
    titleChange the color of markup label arrows and lines
    1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Professional 11.0 User Interface and Browsers.) All hidden and visible note and dimension labels are listed.
    2. Click Properties. This opens the Markup Properties dialog box.
    3. Click the Color... button associated with either Arrow or Line to open the Color dialog box.
    4. Click the desired color and click OK.
    Info
    titleNote
    This procedure changes the color of the selected label only. See also 3D Viewer Settings.
    Expand
    titleAdd a link to a markup label
    1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Professional 11.0 User Interface and Browsers.) All hidden and visible note and dimension labels are listed.
    2. Click Properties.This opens the Markup Properties dialog box
    3. Click in the Hyperlink box.
    4. Type the path of the Web page or file you want to link to. Or click the folder icon to browse to a local file.
    5. Click OK.The text of the label should be underlined.
    Info
    titleNote

    Examples of valid link paths include:

    To link to a user view, type the pound sign # and the name of the saved view.

    To link to another document within the .3D file, surround the name of the document with square brackets [ ]. For example, a link [Wheel] would open the Wheel document.

    If you would like to link a user view within a 3D document add the pound sign # and the viewname. For example, the link [Wheel]#view2 would open the Wheel document and display the view named view2.

    SpinFire 11.0 will append the http:// protocol header to any relative link. Therefore, links to files must use an absolute path.

    Expand
    titleAdd or edit a label description or comment

    To add or edit a description

    1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Professional 11.0 User Interface and Browsers.) All hidden and visible note and dimension labels are listed.
    2. Click Properties.This opens the Markup Properties dialog box.
    3. Click in the Description box and type your comment.
    4. Click OK.The description will appear on the lable beneath the original measurement or note.

    To add or edit a comment

    1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Professional 11.0 User Interface and Browsers.) All hidden and visible note and dimension labels are listed.
    2. Click Properties.This opens the Markup Properties dialog box.
    3. Click in the Comments box and type your comment.
    4. Click OK. A mark should appear in the lower-right corner of the label, indicating the presence of a comment.
    Expand
    titleUser Views
    Info
    titleNote

     

    Expand
    titleAdd Markup to Another View
    Info
    titleNote

     

    Expand
    titleMove Markup to Another View
    Info
    titleNote

     

    Expand
    titleRemove Markup from View
    Info
    titleNote
     

    a dimension markup to make changes to its properties. A context menu will appear and provide command options that are based on the selected markup type. For example, a Point Coordinates markup context menu will differ slightly from an Arc Center to Arc Center markup context menu. (See the Working with 3D Markups for details.)

    Image Added