Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel
borderColor#23bfde
titleAdd a Note . . .
Expand
titleAdd a point note
  1. Open the Notes menu on the 3D Document Toolbar. How? Click the drop-down arrow to the right of the Notes icon.
  2. Click 3D Vertex Note. Red dots designate available points on the model.
  3. Click the point you wish to label. Crosshairs indicate the point where the label will attach. 
  4. When the label appears, drag it into position with your pointer.
  5. Click once to set the position of the label. A cursor will appear in the label.
  6. Type the text of your label and press Enter.
Info
titleNote
If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop
Expand
titleAdd an edge note
  1. Open the Notes menu on the 3D Document Toolbar. How? Click the drop-down arrow to the right of the Notes icon.
  2. Click 3D Edge Note.
  3. Click the edge you wish to label. The edge is highlighted when the pointer is properly positioned. 
  4. When the label appears, drag it into position with your pointer.
  5. Click once to set the position of the label. A cursor will appear in the label.
  6. Type the text of your label and press Enter.
Info
titleNote
If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.
Expand
titleAdd a 3D note
  1. Open the Notes menu on the 3D Document Toolbar. How? Click the drop-down arrow to the right of the Notes icon.
  2. Click 3D Note. The label will appear.
  3. Drag the label into position with your pointer.
  4. Click once to set the position of the label. A cursor will appear in the label.
  5. Type the text of your label and press Enter.
Info
titleNote
If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.
Expand
titleAdd a 2D note
  1. Open the Notes menu on the 3D Document Toolbar. How? Click the drop-down arrow to the right of the Notes icon.
  2. Click 2D Note. The label will appear.
  3. Drag the label into position with your pointer.
  4. Click once to set the position of the label. A cursor will appear in the label.
  5. Type the text of your label and press Enter.
Info
titleNote
If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.
Expand
titleAdd 3D surface note
  1. Open the Notes menu on the 3D Document Toolbar. How? Click the drop-down arrow to the right of the Notes icon.
  2. Click 3D Surface Note
  3. Position your pointer over the surface you wish to label and click. A surface is highlighted when the cursor is properly positioned. Crosshairs indicate the point where the label will attach. 
  4. When the label appears, drag it into position with your pointer.
  5. Click once to set the position of the label. A cursor will appear in the label.
  6. Type the text of your label and press Enter.
Info
titleNote
If you want to add several of the same type of markup, you may select the Lock tool check box that appears when you select a markup command. This will allow you to keep adding the same type of markup to the scene until you click Stop.
Expand
titleAuto note
  1. Open the Notes menu on the 3D Document Toolbar. How? Click the drop-down arrow to the right of the Notes icon.
  2. Click Auto Note...
  3. The Auto Note menu appears.
  4. Specify content and items then click the Apply button.

Image Removed

Info
titleNote

The labels can be repositioned.

The right-click markups context menu will not function while Auto Note menu is active.

Right-click a dimension markup to make changes to its properties. A context menu will appear and provide command options that are based on the selected markup type. For example, a Point Coordinates markup context menu will differ slightly from an Arc Center to Arc Center markup context menu. (See the Working with 3D Markups for details.)

Panel
borderColor#23bfde
titleEditing the Markup
Section
Column
Expand
titleHide/show a label
  1. Right-click the markup dimension label itself or the name of the label in the Markups browser pane to open the context menu.
  2. Click Hide (or Show) markup name to manage whether or not the label is displayed in the scene.
Expand
titleKeep a label in front of the model
  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu.
  2. Click Stay on Top. The Stay on Top setting has a check mark beside it when it is enabled.
Info
titleNote

Markup labels (with the exception of a 2D Note) rotate along with your view of the model. This can result in the label appearing behind the model. You can prevent this with the Stay on Top setting.

Follow this same procedure to disable the Stay on Top setting.

Expand
titleCopy a label
  1. Right-click the label itself or the name of the label in the Markups browser pane to open the context menu.
  2. Click Copy on the menu.

NOT YET IMPLEMENTED

Expand
titleDelete a label
  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu.
  2. Click Delete on the menu.A dialog box asks you to confirm the deletion.
Info
titleNote
Deleting a note or markup dimension label removes it permanently. If you would rather temporarily hide a label, see "Hide/show a label" on this page.
Expand
titleProperties
Expand
titleAdd or change the markup title
  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Ultimate User Interface and Browsers.)
  2. Click Properties.This opens the markup Properties dialog box.
  3. Click in the Title box and type in or edit the markup title.
  4. Click OK.The new text will appear in the label.
Expand
titleChange the font and background used in a label
  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Ultimate User Interface and Browsers.)
  2. Click Properties. This opens the markup Properties dialog box.
  3. Click the button that displays the current font name and size.This opens the Font dialog box. (See 3D Viewer Settings.)
  4. Select the desired font settings and click OK.
  5. Click the Background... button to open the Color dialog box.
  6. Select the background color for the label and click OK.
Info
titleNote

A preview of the selected font and background is shown in the Properties dialog box.

This procedure changes the font of the selected label only. (See 3D Viewer Settings.)

Expand
titleChange the color of markup arrows and lines
  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Ultimate User Interface and Browsers.)
  2. Click Properties. This opens the markup Properties dialog box.
  3. Click the Color... button associated with either Arrow or Line to open the Color dialog box.
  4. Click the desired color and click OK.
Info
titleNote
This procedure changes the color of the selected label only. (See 3D Viewer Settings.)
Expand
titleAdd a link to a markup label
  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Ultimate User Interface and Browsers.)
  2. Click Properties.This opens the markup Properties dialog box
  3. Click in the Hyperlink box.
  4. Type the path of the Web page or file you want to link to, or click the folder icon to browse to a local file.
  5. Click OK. The text of the label should be underlined.
Info
titleNote

Examples of valid link paths include:

To link to a user view, type the pound sign (#) followed by the name of the saved view.

To link to another document within the .3D file, surround the name of the document with square brackets [ ]. For example, typing [Wheel] would open the Wheel document.

If you would like to link a user view within a 3D document, add the pound sign # followed by the viewname. For example, typing [Wheel]#view2 would open the Wheel document and display the view named view2.

SpinFire 11.0 will append the http:// protocol header to any relative link. Therefore, links to files must use an absolute path.

Expand
titleAdd or edit a description or comment

To add or edit a description

  1. Right-click the label itself or the name of the label in the Markups browser pane to open the context menu. (See The SpinFire Ultimate User Interface and Browsers.)
  2. Click Properties.This opens the markup Properties dialog box.
  3. Click in the Description box and type a description.
  4. Click OK.The description will appear on the label beneath the note title.

To add or edit a comment

  1. Right-click the label itself or the name of the label in the Markups pane to open the context menu. (See The SpinFire Ultimate User Interface and Browsers.)
  2. Click Properties.This opens the markup Properties dialog box.
  3. Click in the Comments box and type your comment.
  4. Click OK. A mark will appear in the lower-right corner of the label, indicating the presence of a comment.
Expand
titleUser views

 

Expand
titleAdd the markup to another view

 

Expand
titleMove the markup to another view

 

Expand
titleRemove the markup from view

 HOW IS THIS DIFFERENT FROM DELETE? 

Column

Related Topics