Page Comparison

1. Open the Advanced Linear menu on the 3D Document Toolbar. (Click the drop-down arrow to the right of the Linear icon to see the menu of commands.)
2. Select Tube Length.
   
   The Tube Length Measurement dialog box provides the following options:
   
   1. Auto Complete - Signals SpinFire to automatically traverse the pipe — following all the straights and bends — to determine its length. Selected by default.

      

      Note: If you choose to clear the checkbox, you will need to manually select each arc from the beginning of the pipe to its end. During selection, if a mistake is made, you will need to restart the selection process. However, manual selection can be useful when you want to measure only a portion of the tube.

   2. Lock tool - Select to use the command more than once.
   3. Hyperlink - Enter a link to a file or to a document and user view within the current file.
3. Position your cursor on the starting arc or circle and double-click. (Selectable arcs and circles are highlighted as you mouse over them.) The selected arc or circle remains highlighted.
4. Position your cursor on the ending arc or circle. 
   1. Click once to see a highlighted line that indicates the shortest distance between the two arcs. 
   2. Double-click to accept the measurement and see the markup label. 
5. Position the markup, then click once. The highlighted line changes color to indicate that the measurement is complete.
   
6. At this point, you have the following options:
   1. Click Copy to copy the markup content to the Windows clipboard.
   2. Click Export... to save the markup content to a .csv file. (See also Create a tube length bill of materials on this page.)
   3. Click Stop when you're finished taking multiple measurements.
   4. Click Close (or X) to end the command and close the dialog box.

The Tube Length Bill of Materials command After completing a tube length measurement (see Measure tube length on this page), you can create a bill of materials that includes the following information:

exports a model's existing tube length measurements to a .csv file contains the following information:

• Length

• Diameter 

• Arc1 Center XYZ 

• Arc2 Center XYZ 

• BendRadius 

• BendAngleDegrees 

• BendCenter XYZ 

• Intersection XYZ 

• Total length

To create a

tube length bill of materials:

1. After completing a

1. tube length measurement, click the Export... button.Image Added
2. Enter a file name

1. .
2. Click the Save button.

Alternatively,

1. On the Markups list, right

1. -click on a

1. tube length measurement.
2. Select Export... in the context menu.
   Image Added 
3. Enter a file name

1. . 
2. Click the Save button

Image Removed

Known Limitations

Differing Diameters

The Tube Length Bill of Materials uses the diameter measurement from the start of the tube. If a the tube changes in diameter, this can be reported in the Bill of Materials incorrectly.

Unicode Characters 

1. .