Page Comparison

Once the floating license server has been set up you will need to activate the local users(clients) to ensure that they have access to the Server

You can check if your activation of SpinFire is successful from your Home page under Status - You will see a tick in the floating license box.

Image Removed

A new client installation of SpinFire can be activated during installation by enter the SEAT ID when prompted

However, there are numerous methods to do License activation for existing SpinFire installations

Option 1 - Activate by License Files Method

If you have a fixed license, Actify can provide you with a license.al file. Save this either on the local client (user's pc) or somewhere accessible on the server.

Go to Options > Activation > Read License File > Browse to the license.al file > Open

 Image Removed

 Image Removed

Option 2 - Alternative Manual activation Method

For Floating License, If SpinFire does not activate through Option 2 , do the following:

Close SpinFire

Save/Overwrite existng copies of both the license.al and sfpflv2.dat file into the following location:

C:\ProgramData\Actify\SpinFire11

 Image Removed

If you do not see ProgramData on your C Drive, you’ll need to open the C Drive and select Options

 Image Removed

Then click the View tab and tick “Show Hidden Files, Folders and Drives” and click OK

 Image Removed

On SpinFire's Home page you should see “Floating License” ticked , which means it's now activated.

 Image Removed

If it then errors regarding an importer when you try to open a file, you may need to review the Floating License Manager logs and if there’s errors on the server, to escalate to your I.T or the Actify Support team. When doing so, please provide a copy of your machine’s dxdiag that SpinFire is installed on, as well as your SpinFire.log file (C:\ProgramData\Actify\SpinFire11\Logs)

Option 3 - Server Activation Method

To do a normal Floating License Activation, this can be done using Activate Floating License, but the server details must be written (as well as Server port if has been fixed to a specific one)

Server Activation

This is done by using "Activate Floating License", The Server Name, the MAC address and the Server port (if specified on the server) must match the server hosting the Floating License Manager.

1. 
2. Enter the Server Name and Server MAC Address. Click the OK button.
   
   
   
3. Confirm the changes. 
   
4. Click the License Server Status button to see the number of licenses used and when the license was taken.
   
5. Click the Activate Floating License button. 

If the activation fails, the following error message appears indicating that the application is in Reader Mode. Verify that the server name and MAC address are correct and try again. 

If activation is successful, you will be directed to the SpinFire Ultimate registration page.

License Status

To view the license status on the floating license server,

1. Run LMTools on the server.
2. Select the Server Status tab. 
3. Click the Perform Status Enquiry button.