Versions Compared

Old Version 20

changes.mady.by.user Glen Yamakawa

Saved on

compared with

New Version 21

changes.mady.by.user Glen Yamakawa

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Reverted from v. 19

Image RemovedImage Added

 

 

SpinFire Ultimate opens .3D files and all 3D CAD files in 3D mode and displays the 3D document toolbar. With this toolbar, you can initiate commands using a combination of buttons and menus to view and manipulate document objects.

Open a menu by clicking the drop-down arrow to the right of an icon on the toolbar. Once you have used a particular command, the icon associated with that command will remain on the toolbar. You can then quickly repeat the last command you called with just one click.

For example, to measure the diameter of an arc, click the drop-down arrow next to the current Radial menu icon, then select Arc Diameter. The Arc Diameter icon will remain on the toolbar until another linear measurement command is selected.

To find out which command is active, move your pointer over the icon to see the pop-up label.

 

 Image Modified
Expand
titleHide/Show Browser Pane

Controls the visibility of the browser pane on the left side of the SpinFire Ultimate window.

 

Image Modified

Expand
titleSelection (or Picking) Mode

The selection/picking mode determines whether a part (left icon) or a surface (right icon) is selected when you right-click on a model.

 

Image Modified

Expand
titleBackground Color Menu

Enables you to override the default Workspace background color and gradient options (see 3D Viewer Settings).

Image Modified


 Image Modified
Expand
titleDisplay Menu

Controls whether or not notes, dimensions, coordinate systems, or PMI annotations are displayed in the scene. You can also use this menu to turn on/off the grid, axis triad, or navigation cube.

Image Removed

Image Added

 Image Modified
Expand
titleViewports Menu

Contains options for splitting the viewport into two or more viewports. See Controlling the View for details

Image Modified

 Image Modified
Expand
titleProjection Mode

Determines whether perspective (left icon) or parallel (right icon) projection is used in the scene (the default is set on the 3D Viewer Settings page). See Controlling the View for details.

 Image Modified
Expand
titleRendering Menu

Controls how the 3D objects are drawn (the default is set on the 3D Viewer Settings page). See also Assemblies and Parts in a 3D Scene.

Image Modified

 Image Modified
Expand
titleEffects Menu

Controls resolution, blurring, and intensity of blooms (bright spots), reflections, and shadows. (Defaults are set on the 3D Viewer Settings page.)

Image Modified

 Image Modified
Expand
titleZoom Menu

Contains mouse mode (pointer behavior) and viewing options. See Controlling the View for details.

Image Modified

 Image Modified
Expand
titleSection Menu

Contains section plane and profile display commands; controls profile colors and plane alignment and placement. See Cross-Sectioning a 3D Model for details.

Image Modified

 Image Modified
Expand
title3D Notes Menu

Contains commands for inserting a note markup label. See /wiki/spaces/SF1100/pages/3233339061 and 3D Notes for details.

Image Modified

 Image Modified
Expand
titleLinear Menu

Contains commands for measuring lengths, coordinates, and edges. See 3D Dimensions and 3D Linear Menu for details.

Image Modified

 Image Modified
Expand
titleAdvanced Measurement Menu

Contains commands for measuring lengths, minimum thickness and distances, and areas. See 3D Dimensions and 3D Linear Menu for details.

Image Modified

 
Anchor
radial menu icon
radial menu icon
Image Modified
Expand
titleRadial Menu

Contains commands for measuring arcs and circles. See 3D Dimensions and 3D Radial Menu for details.

Image Modified

 Image Modified
Expand
titleAngular Menu

Contains commands for measuring angles. See 3D Dimensions and 3D Angular Menu for details.

Image Modified

 Image Modified
Expand
titleSmart Edge Dimension

A versatile edge and surface measuring tool. See Smart Dimensions for details.

Image Modified

 Image Modified
Expand
titleLength Units Menu

Provides options for choosing length measurement units. The new selection will override the default settings only in the active viewport. See Options.

Image Modified

 Image Modified
Expand
titleAngular Units Menu

Lists options for choosing angle measurement units. The new selection will override the default settings only in the active viewport. See Options.

 Image Modified

 Image Modified
Expand
titleWeight Units Menu

Lists options for choosing weight measurement units. The new selection will override the default settings only in the active viewport. See Options.

 Image Modified

 Image Modified
Expand
titleMaterials Menu

Provides options for choosing which material is to be used when the object is manufactured. The drop-down list originates from the Measurement section on the 3D Viewer settings page > Define Materials....

The new selection will override the default settings only in the active viewport. See Options.

 Image Modified

 Image Modified
Expand
titleAnalysis

Perform further analysis on your model with color mapped visuals with model compare, draft angle analysis, wall thickness and curvature.

 

Expand
titleModel Compare

The Model Compare functionality takes two similar parts and displays what is the same and different through the use of coloring the parts.

Image Modified

See Model Compare.

Expand
titleDraft Angle Analysis

The Draft Angle Analysis allows the user to easily analyze a part for proper draft angle. A Draft Angle describes the amount of taper for molded or cast parts perpendicular to the parting line.

Image Modified

See Draft Angle Analysis.

Expand
titleWall Thickness Analysis

Discovery changes in thickness of parts using the Wall Thickness Analysis tool. One can quickly determine if parts are too thick or too thin with the color washing of the model.

Image Modified

See Wall Thickness Analysis.

Expand
titleCurvature Analysis

Curvature analysis color maps the curvature of a surface based on the curvature analysis used (Gaussian, Mean, Maximum) to aid in design and manufacturing preparation.

Image Modified

See Curvature Analysis.

 Image Modified
Expand
titleExploded Assembly

Exploded Assembly enables you to quickly transform multiple or all parts of an assembly in a chosen uniform pattern.

Choose one of the three different transformation methods:

  • Linear - All components move in one direction
  • Radial - All components move out from a central axis
  • Spherical - All components move out from a central point.

Image Modified

 

Expand
titleType

Linear - Transforms the parts of the assembly in a straight line along the selected axis.
Image Modified

Radial - Transforms the parts of the assembly in a circular direction around the selected axis, starting from the coordinate system origin.
Image Modified

Spherical  -Transforms the parts of the assembly in a spherical direction around the coordinate system origin.
Image Modified 

Expand
titleDirection

Image Modified

  • Coordinate System - Specify the global coordinate system or select a user-defined coordinate system as the point of origin for the exploded transformations. This specification can be used with all types of exploded assemblies.
  • Axis - Select the X-axis, Y-axis, or Z-axis as the direction the selected exploded assembly type will take. Axis is used only with Linear and Radial transformation methods. 
Expand
titleSelect Parts

Select the entire assembly or selected parts o perform the assembly explode.

  • All Parts - (default)
  • Select Parts -When selected, you can select parts from either the assembly tree or the model.Image Modified
    First click the Select button to start selection. Click Stop Selection when done. Select a part in the list and click the Remove button to remove selected parts from the list.
Expand
titlePercentage

Slider Bar - Use the percentage slider bar (0-100) to view the assembly exploding in real-time.
Image Modified

Expand
titleCreate User View

Image Modified

Click the Create User View button to save the exploded assembly transformation.

Clicking Cancel, to return to the original model view.

 

Image Modified

Expand
titleCoordinate System

Opens a dialog box for creating/changing a coordinate system. See Coordinate Systems in a 3D Scene for details.

Image Modified

Image Modified

Image Modified

 Image Modified
Expand
titleProperties

Shows the meta data found in the CAD file.

Image Modified

For parts, users can enter in additional data to be saved with their ACT3D files.

Image Modified

 Image Modified
Expand
title3D Viewer Settings

Opens an Options dialog box that allows you to change 3D Viewer settings.

Image Modified

 

Image Removed

Expand
titleShow Only Graphics
Click to show the graphical region at full screen without menus, navigation bars, and tool bars.